Cerwin-Vega Amplifiers

Behold Vega Amplifiers.
Five high-power,
high-voltage, absolutely huge-output models.
And one extremely
cool little button.

The technical term
is Vega Bass
dynamic power bass
enhancement circuitry.

Simply, you push the
dash mounted button
and instantly you get
a whopping 3 dB rush
of dynamic power and up
to 10 dB of bass boost.

That's DOUBLE the
rated power.

Your finger's never
had this much fun.
The sound is tight,
clean, and accurate.

As for the bass,
it's freakin' massive.

Check out the features.

From the 14-carat
gold-plated connectors
to the military spec
circuit boards,
these amps are 100%
made-in-the-USA,
bulletproof audio beasts.
Go ahead,
push the button,
and pull G's.

Four models including three 2-channel
amps rated at 40, 80, and 175
watts per channel (into 4 ohms) and
a four-channel amp rated at 80 watts
per channel (into 4 ohms).

. . . . . . . . . . . . . . . . . . . . . . . . . .

Exclusive Vega Bass dynamic power
bass enhancement circuitry provides
up to +3 dB of dynamic power and
up to +10 dB of bass boost with 20 Hz
subsonic filtering and "soft-clip"
dynamic limiting.

. . . . . . . . . . . . . . . . . . . . . . . . . .

Remote digital level control
provides shift "on the fly" amplifier
level-control right from the cockpit
of the vehicle through a conventional
four-wire telephone cable.

. . . . . . . . . . . . . . . . . . . . . . . . . .

On-board continuously-variable
active crossover designed with
selectable 12 dB/oct. (24 dB/oct.
in low-pass bridged mode) slopes and
choice of Butterworth high pass,
or low pass filter for the ultimate in
system building flexibility.

. . . . . . . . . . . . . . . . . . . . . . . . . .

Filter-configured low-level RCA
outputs can be set for full range
or filtered operation and independently configured for multi-amp applications.

. . . . . . . . . . . . . . . . . . . . . . . . . .

Output level monitor provides real
time feedback for low distortion
system balance optimization.

. . . . . . . . . . . . . . . . . . . . . . . . . .

Fader-loaded speaker-level inputs
(on Vega 1600 only) accept speaker
inputs from a factory or after-market
source unit, yet provide fader control
for an easy upgrade of an existing
system.

. . . . . . . . . . . . . . . . . . . . . . . . . .

High-current bipolar transistors
in output circuits for outstanding
damping control and pure signal
reproduction.

. . . . . . . . . . . . . . . . . . . . . . . . . .

Isolated bipolar regulated power
supply supplies separate power for
low-level preamp signals to prevent
overload distortion and improve
S/N performance.

. . . . . . . . . . . . . . . . . . . . . . . . . .

Additional amplifier features include:

. . . . . . . . . . . . . . . . . . . . . . . . . .

Direct-coupled low-level signal inputs

. . . . . . . . . . . . . . . . . . . . . . . . . .

High-efficiency toroidal power
transformer

. . . . . . . . . . . . . . . . . . . . . . . . . .

Remote stiffening capacitor port
(n/a on Vega 1600)

. . . . . . . . . . . . . . . . . . . . . . . . . .

Three-stage protection circuitry

. . . . . . . . . . . . . . . . . . . . . . . . . .

Optical ground isolation

. . . . . . . . . . . . . . . . . . . . . . . . . .

Regulated power supply
Military-spec. epoxy fiberglass
printed circuit boards

. . . . . . . . . . . . . . . . . . . . . . . . . .

3/2/1-channel capability (3204)

. . . . . . . . . . . . . . . . . . . . . . . . . .

14-karat gold-plated connectors