The 7000 series was a
GREAT SUB!
Similar
to photo, 3.6 set shown
200 Watts x 2 into a 4 Ohm load with less than .5% THD
300 Watts x 2 into a 2 Ohm load with less than 1% THD
600 Watts bridged into a 4 Ohm load with less than 1% THD
Dynamic Power (IHF-202 Standard) measured at 14.4 Volts DC:
200 Watts x 2 into a 4 Ohm load
375 Watts x 2 into a 2 Ohm load
750 Watts bridged into a 4 Ohm load
Signal to Noise Ratio:
100dB A-Weighted (Referenced to Rated PWR at 1VRMS Input Sensitivity)
Damping Factor: >200
Frequency Response: 20-20,000 Hz ±.25dB
Bass Boost: Variable Boost centered at 40Hz (0 to 18dB)
Defeatable 18 dB/octave crossover at 85 Hz, selectable for high pass, low pass, or full range.
Dimensions:
12" x 9" x 2" (30.5cm x 22.8cm x 5cm) (not including mounting feet)
13 1/4" x 9" x 2" (33.6cm x 22.8cm x 5cm) (including mounting feet)
The Road Thunder 2200, 2400 and 2600 include cool features that
decrease installation time and enhance enjoyment for consumers.
The Road Thunder 2200, 2400 and 2600 incorporate MTX's (patent pending)
"Smart Engage" auto turn-on circuit. This circuit allows
installation of the amplifier without the need to remove the head-unit.
With the "Smart Engage," installers can simply connect the
amplifier's high-level inputs to the vehicle's factory speaker wires and
the amplifier will automatically turn on when music is received.
The crossover controls add flexibility to the new Road Thunder two-channel
amplifiers. Audio fans may set these controls to high-pass, low-pass or
full-range to easily configure the vehicle's audio system. They will also
benefit from the new Road Thunder amplifiers' line-level output, which
sends a full-range signal to other amplifiers that may be added to the
audio system.